2015 Stallcup's 70E Electrical Safety in the Workplace

Customer Service

This book was developed to make electrical safety easy to understand and enforce. The rules are taken from NFPA 70E®, Electrical Safety In The Workplace, and correlated with OSHA 29 CFR 1910, Subpart S; OSHA 29 CFR 1926, Subpart K; ANSI C2, National Electrical Safety Code, (NESC); and NFPA 70, National Electrical Code (NEC).

Many designers, installers and inspectors have trouble understanding, interpreting, and applying the electrical requirements listed in the above standards and codes. These requirements have been assembled and correlated in such a manner as to be easily understood. To help expedite the time involved in finding the rules and applying the requirements for general industry, sections in each standard have been listed for fast reference.

Designers must design and lay out electrical systems to meet the provisions of the OSHA standards. Installers are required to install and wire electrical systems to comply with the NEC and provide safety for the employee working in his or her workplace. Inspectors must inspect the electrical system to ensure that it not only complies with the NEC but also provides the necessary safety requirements of OSHA and NFPA 70E

Contents:

• Article 100: Definitions (see Annex E)
• Article 110: General Requirements for Electrical Safety-Related Work Practices
• Article 120: Establishing an Electrically Safe Work Condition
• Article 130: Work Involving Electrical Hazards
• Article 200: Introduction
• Article 205: General Maintenance Requirements
• Article 210: Substations, Switchgear Assemblies, Switchboards, Panelboards, Motor Control Centers, and Disconnect Switches
• Article 215: Premises Wiring
• Article 220: Controller Equipment
• Article 225: Fuses and Circuit Breakers
• Article 230: Rotating Equipment
• Article 235: Hazardous (Classified) Locations
• Article 240: Batteries and Battery Rooms
• Article 245: Portable Electric Tools and Equipment
• Article 250: Personal Safety and Protective Equipment
• Article 300: Introduction
• Article 310: Safety-Related Work Practices for Electrolytic Cells
• Article 320: Safety Requirements Related to Batteries and Battery Rooms
• Article 330: Safety-Related Work Practices for Use of Lasers
• Article 340: Safety-Related Work Practices – Power Electronic Equipment
• Article 350: Safety-Related Work Requirements – Research and Development Laboratories
• OSHA 1910.331 thru .335: Safety-Related Work Practices
• ANNEXES A – F

Publisher: Grayboy, Inc, 2017  ISBN: 9781622701650